Firmware for Lenovo S90 Sisley
Welcome, this article contains information about the mobile device. Here you can download the latest Android firmware for Lenovo S90 Sisley , and you can also find out how to get root rights .
You can read more about root rights here. Instructions for obtaining are below.
In what cases is it necessary to update the firmware?
- I would like to install new firmware to expand the capabilities of the smartphone;
- Recovery after unsuccessful firmware is required
- The smartphone constantly reboots for no reason;
- The device does not turn on.
Hard Reset for Lenovo S939
Instructions on how to do a Hard Reset on Lenovo S939 (factory reset). We recommend that you familiarize yourself with a visual guide called resetting settings on Android. .
Reset codes (open the dialer and enter them).
- *2767*3855#
- *#*#7780#*#*
- *#*#7378423#*#*
Hard Reset via Recovery
- Turn off your device -> go to Recovery
- "wipe data/factory reset"
- “yes - delete all user data” -> “Reboot System”
How to log into Recovery?
- hold down Vol(-) [volume down], or Vol(+) [volume up] and the Power button
- A menu with the Android logo will appear. That's it, you are in Recovery!
Resetting settings on Lenovo S939 can be done in a very simple way:
- Settings->Backup and reset
- Reset settings (at the very bottom)
How to reset a pattern key
How to reset the pattern key if you forgot it and now you can’t unlock your Lenovo smartphone. On the S939 model, the key or PIN can be removed in several ways. You can also remove the lock by resetting the settings; the lock code will be deleted and disabled.
- Reset graph. blocking - Instructions
- Password reset - Instructions
Added including from w3bsit3-dns.com, needrom and XDA on 11/14/2021
The S939 smartphone scored 26827 points in the AnTuTu test, which is enough even for some heavy games. It seems he can do more.
Download firmware
When writing a review through the comment system, indicate your real email if you have problems installing the firmware. Please take into account that the site administration may not respond immediately, depending on the flow of applicants. In addition to the administration, ordinary users can answer and help you, everything is like on the forum.
Instructions for installing firmware are located at the links below. Firmware download for Lenovo S90 Sisley is available via torrent with instructions.
Firmware installation instructions
To download, select the firmware you need and click on the link.
- Download Android 11 firmware URL: yourtopfile.info/android11
- Download Android 10 firmware URL: yourtopfile.info/android10
- Download Android 9 PIE firmware URL: yourtopfile.info/android9pie
To install, do the following:
- Download the file with firmware and special program
- Run the program on your computer
- Select the desired firmware version
- Strictly follow all instructions from the archive
Lenovo Vibe Shot firmware
Detailed instructions: Lenovo Vibe Shot firmware
Attention!!
Before doing anything with the device, I strongly recommend making a backup EFS/NV
and the entire system of your smartphone to restore it at any time if any problems arise!
Before flashing or “ Wipe”
» Do the reset using standard Android tools, otherwise there will be problems with your Google account.
On rooted firmware, do not update SuperSU
from PlayMarket
if asked - you risk getting bricked!! Only flashing the phone will help!!
Before flashing firmware from QFIL or MiFlash, be sure to remove the flash card. The phone is bricked!!
All ROW firmware and instructions for flashing the phone are also suitable for the z90-3, you just need to replace it with the stock NON-HLOS.bin file, otherwise the connection will be lost!!
Before flashing, remove the SIM card and flash drive (there were cases of bricks due to them).
How to enter firmware mode (port 9008)
Provided that all the necessary drivers are installed: Turn off the phone (wait until it turns off completely) >> hold down the “volume +” button and without releasing it, connect the USB cable to the phone.
In Device Manager, your phone should be identified as Qualcomm HS-USB QDLoader 9008
:
If this does not happen, we first try to change the ports, figure out if everything is okay with the drivers and/or (relevant for ROW firmware) try another method: Unpack the Android.rar archive (479.27 KB) to the root of the C:\ >> open the Windows command line >> type in the command line: CD C:\Android connect the turned on phone to the computer (in the “for developers” menu, USB debugging must be enabled and if you connect the phone to the computer you are using for debugging for the first time, a window will pop up on the phone screen , with a confirmation request - we allow it by checking the box.) >> in the command line we enter: ADB devices if everything is fine, then in the command line we will see something like:
then enter: adb reboot edl Now you are in 9008 mode!!
Drivers and utilities
Qualcomm Driver
: Qualcomm+Driver.rar
Driver for Qualcomm HS-USB QDLoader 9008 Qualcomm_USBDriver_2.1.0.5_x86.cab Qualcomm_USBDriver_2.1.0.5_x64.cab
LenovoUsbDriver
: LenovoUsbDriver_autorun_1.0.16.exe (9.29 MB) LenovoUsbDriver_autorun_1.0.13.exe (9.29 MB)
Program for working with QPST firmware:
QPST.2.7.432 (26.13 MB) QPST_2.7.422.7z (25.19 MB)
Instructions for using the QPST program:
1. Download the program itself for the firmware (QPST) and the Qualcomm Driver. 2. Unpack the contents of the two archives into a convenient folder. 3. Install vcredist_x86.exe (Lits in the folder with the flasher) 4. Install the flasher itself QPST.2.7.422.msi 5. Install the drivers. (If Win8/8.1/10, then disable the signature before installation.) 6. Remove the SIM cards and memory card from the phone. IMPORTANT!!! 7. Check that the drivers are installed correctly. Open the device manager on the PC, then turn off the device (smartphone or tablet) and remove the USB cable from the device (if it was connected). After that, hold down the Volume Up key and, without releasing it, connect the USB cable that is already connected to the USB 2.0 port of your PC - the Qualcomm Lenovo HS-USB QDLoader 9008 device should appear in the Device Manager (The character must match the character if You have 9006 at the end, then read above how to go to 9008)
8. Download the firmware we need from the header. (it should be written that it is for Qfil) and unpack it. 9. Launch the Qfil application (Can be found in the list of all applications in the QPST folder) 10. In the application itself, do the following: In the Programmer path field, indicate the path to the file prog_emmc_firehose_89XX.mbn (in my case, prog_emmc_firehose_8936.mbn), to do this, click on the button " Browse", in the window that opens, indicate the path to the folder with the firmware (in my case ROW_S118), then select the file prog_emmc_firehose_89XX.mbn and click "Open". Then click on the “Load XML...” button, in the window that opens, select one by one - first rawprogram0.xml and click “Open”, and then patch0.xml and also click “Open”. If you have a more recent Qfil program and the Browse button is not active, you need to switch to Flat Build immediately under the Select Duild Type inscription.
11. We check that the program picked up the device and it was identified correctly. (pay attention once again to the fact that it should be Qualcomm Lenovo HS-USB QDLoader 9008
. Otherwise, we return to point 7
12. If everything is correct, click the Download button and the firmware process will begin. After the firmware is completed, the phone will reboot and should turn on. If something is wrong, check all the steps.
Program for working with MiFlash firmware:
MiPhone20151028 (26.04 MB) MiPhone2015731 (27.75 MB) MiPhone20141107 (25.98 MB)
Instructions for Miflash
.
- unzip downloaded file with the firmware - turn off the phone - hit VOL + and plug USB cable (phone will vibrate once) - in Device Manager (Control Panel) new COM port should appear: Qualcomm HS-USB QDLoader 9008 - run Miflash, you should see appropriate COM port - browse folder with downloaded firmware - click 'flash' and wait (about 180s) - disconnect USB cable, hit POWER key for about 10s (phone will vibrate) - phone will restart and load new system. It takes some time — and if it hangs, please hit POWER again for 10s, it will reboot again and it should proceed
-Unpack the downloaded firmware. -Turn off the phone -Hold down the volume “+” button and connect via USB to the PC (the body should vibrate). -A new Com port should appear in the computer's control panel. after installing the firewood it will show Qualcomm HS-USB QDLoader 9008. -Launch Miflash. Presses the refresh button. The com port should be determined (for me it showed com 10) -In Miflash you show the path to the firmware. -Press Flash. Wait 180 seconds. -After flashing, remove the body from the USB. Hold the power button for up to 10 seconds. If it does not start, press and hold the power button again. The first launch of the system begins!!!
How to choose firmware:
There are two versions of the phone (actually three, but to make things easier to understand, I think we won’t consider the Z90-3 at all for now): 1)
Z90-7
is the Chinese version of the phone, which you also successfully purchased and are using 2)
Z90a40
- exactly the same phone as yours but aimed at the European market (sales have just started) Now the most important thing is that the “
Chinese
” version of the phone
has its own
official firmware (Z90-7_USR_ST1527), and the “
European
”
has its own
( "S118", "S208"). Through testing, it turned out that the “Chinese” version of the phone, without any dancing with a tambourine, installs firmware intended for the “European” version of the phone.
How to disable Windows driver digital signature verification
Instructions for installing QSB firmware from the internal memory of the phone.
Preparatory stage: 1. Charge the phone battery to at least 70%; 2. Remove the SIM card and memory card from the phone. 3. Create the sdfuse folder in the root of the phone’s internal memory. 4. Place the qsb firmware (file with .qsb extension) in the sdfuse
.
Attention!!! Make sure that the sdfuse
contains only one qsb file!!!
Direct installation of the firmware: 1. Turn off the phone. 2. Simultaneously press and hold the “Volume Down” and “Power” keys until the service menu appears. 3. Select the item “sd update“. 4. We wait for the installation to complete. PS. Navigation through the service menu is carried out using the “Volume Up” and “Volume Down” keys, selecting a menu item is done using the “Power” key
Official firmware:
International ROW (multilingual with full Russian localization) Z90a40_S240_160119_ROW_QFIL.zip (for qfil and MiFlash) QRZ90a40_USR_S218_150908_ROW_sdcard.7z QRZ90a40_S209_150716_ROW_qpst (for qfil and MiF lash) QRZ90a40_S209_150716_ROW_sdcard Z90a40_S118_1505272008_ROW.7z Z90a40_S118_150527_ROW.qsb Z90a40_S208_1507141216_Q2020131.4_ROW_OTAFull.z ip Z90a40_S209_150716_ROW.qsb
Chinese (English-Chinese): Z90-7: Z90-7_USR_ST1527_5.468.1_1507011220_Q2038.1_BMP_CN_SD
Z90-3: Z90-3_USR_ST1525_5.175.1_1506171749_Q2038.1_BMP_CN - for .qsb (SDcard) installation.
Z90-3_USR_ST1527_5.206.1_1507011115_Q2038.1_BMP_CN.rar Z90-3_USR_ST1527_5.206.1_1507011115_Q2038.1_BMP_CN_otafull.zip Z90-3_USR_ST1527_5.206. 1_1507011115_Q2038.1_BMP_CN_qpst.7z
Lenovo_VIBE_SHOT_ mobile version_(Z90-3)_official_factory_firmware _USR_S032_1509091135 - for .qsb (SDcard) installation.
Not official firmware:
Z90a40_S240_SuperSU_ROW_QFIL (full international stock+root) S226_ROW (full international stock+root) Okencjusz for QFIL/Miflash S208_ROW (full international stock+root) S118_ROW (full international stock+root) install via QFIL LenovoVibeShotZ90-7_Lang_0629 20150 619_VIBEUI_V2.5_1525_5.404.1_ST_Z90- 7-Root_Phoenix - (Google (GAPPS) file 20150628_GAPPS.zip)
Popular app selections for October 2021
Applications:
- Arcade
- Multimedia
- Adventures
- Other selections
- Sandboxes
- Internet
- Pixel
- System
- Action
- For motorists
For phones:
- Alcatel OneTouch Pop C2
- BLU Dash X Plus
- Sharp Aquos R3
- Sony Xperia E4
- Archos 70b Copper
- LG X5
- Lava X81
- Haier G55
- Sony Xperia Z3 Compact
- Archos 55 Helium 4 Seasons
For tablets:
- Sony Xperia Z2 Tablet Wi-Fi
- Chuwi V8S
- Teclast X10HD 3G
- Asus ZenPad 10 Z301MF
- Texet X-pad Navi 8.1 3G
- Teclast Tbook 16 Pro
- Lenovo IdeaTab A2107
- Huawei MediaPad M1 dtab d-01G
- ZTE Zpad 8
- Huawei MediaPad 7 lite
Versions:
- Games for Android 9.0
- Programs for Android 1.1
- Games for Android 4.4.3
- Programs for Android 4.2.2
- Games for Android 4.4.1
- Programs for Android 5.0
- Games for Android 2.0.1
- Programs for Android 10.0
- Games for Android 6.0
- Programs for Android 3.2
Why update the firmware on Android
The reasons are different for everyone, the main thing is that in new firmware the manufacturer corrects bugs and shortcomings.
- There are problems with the front selfie camera; let’s say it takes pictures that are far from the quality indicated on the lens.
- There is a problem with the display response, or more specifically, with the response speed.
- I would like to understand what the new Android is.
- I'm tired of the old version of Android and want to expand its functionality.
- The smartphone does not turn on or is terribly glitchy.
- The phone stopped charging.
