Lenovo Vibe P1m phone update

Custom firmware for Lenovo Vibe P1m

Dear forum users, this article is for those who decided to update the firmware and get root rights to Lenovo Vibe P1m .

Why is it time to update the firmware?

• Reason number 1 - I wanted to install new firmware, expand the functionality and capabilities of the mobile device;
• Reason two - there is a need to restore the device after unsuccessful firmware
• The third reason is the incorrect behavior of the smartphone, constant reboots for no reason, glitches;
• The fourth reason is that the smartphone does not turn on and shows no signs of life.

Why do you need to flash your smartphone?

If your smartphone stops receiving from, then it’s time to install alternative firmware on it. Also, Lenovo p1ma40 firmware may be needed in the following cases:

• you need to get a newer version of the software;
• rework the interface: change the shell, replace the graphic part, install additional themes;
• change the assignment of key functions;
• improve camera performance;
• change speaker sound settings.

Also, Lenovo P1m firmware is simply necessary if the smartphone does not turn on, freezes or has turned into a brick.

Download custom firmware

If it’s not difficult for you, leave a review through the comment system, as well as any questions you have. Everything is like on the forum, only without registration.

Instructions for installing firmware are located at the links below. Firmware download for Lenovo Vibe P1m is available via torrent with instructions.

Firmware installation instructions

To download, select the firmware you need and click on the link.

1. Download Andro >upfileget.info/droid9pie
2. Download Andro >upfileget.info/droid8oreo
3. Download Andro >upfileget.info/nougat7_1
4. Download Andro >upfileget.info/andr10

To install do the following:

• Download the file with firmware and special program
• Run the program on your computer
• Select the desired firmware version
• Strictly follow all instructions from the archive

Firmware stages

Let's look at how to flash Lenovo Vibe P1m firmware using a personal computer. To do this, you need to prepare in advance:

• download the Flash Tool program to your PC;
• download drivers and firmware for this device model to your computer;
• Prepare a USB cable.

You can download the necessary utilities on the website 4pda.ru. After this, you can start flashing the firmware. The phone must be charged at least 30%, otherwise it will not be possible to update it. So, you should do the following steps sequentially:

• Connect the phone via a USB cable to the computer, having first removed the battery from the mobile device. As soon as an unidentified device appears in the Task Manager, you need to very quickly click on it using the right mouse button. After this, the device can be disconnected from the PC.
• Now go to the folder with the firmware and install the drivers.
• After that, go to the folder with the Flash Tool program and select the file MT6537M_ Android_scatter.tkt.

• An image will appear on the monitor screen indicating that the device is ready for firmware.

• Here you can see that all the checkboxes are active. You need to select “Firmware Updgrade” in the “Download Only” button.

• This indicates that full firmware has been selected, deleting all data on the device.
• Now press the “Download” button, and with the mobile device turned on, press the volume rocker “+” and connect the smartphone via a USB cable to the PC.

• If the drivers are installed correctly, you can see below that formatting is taking place and the firmware process begins.

• Below you can see the percentage of the update completed.

As soon as such an image appears on the screen, you can close the program and disconnect

USB cable from PC. This indicates that the Lenovo Vibe P1ma40 firmware is complete. All that remains is to turn on the laptop and check how the software update went.

How to root Lenovo Vibe P1m

We recommend reading about the root:

Now to the point, to get root rights we will use the program Rootkhp Pro 1.8 , available on the official website Rootkhp.pro .

Instructions

After this, we wait for a message that root rights have been obtained

Add a comment Cancel reply

You must be logged in to post a comment.

On this page of our information portal you can download the official firmware version MIUI 10, MIUI 9, MIUI 8, custom original firmware TWRP, CyanogenMod, AOSP Extended 5.7, 4.6, Hydrogen OS, LineageOS 16, 15.1, Resurrection Remix, FlyMe OS 7, 6 , Odex and Deodex, watch a video review, leave a review, check out the prices and buy the model you are interested in. To download firmware for Lenovo Vibe P1m phone with Android 10.0 or Android 9.0 Pie, Android 8.0 Oreo, Android 7.0 Nougat, Android 6.0 Marshmallow, Android 5.0 Lollipop, Android KitKat 4.4.x, 4.1.x, 4.2.x, Android 4.3 Jelly Bean You must leave your full, detailed review about this smartphone model.

Why update the firmware on Android

Everyone is motivated by different reasons.

• The problem is with the quality of the pictures, even if you have a good camera.
• Poor display response to touch.
• I would like to understand what the new Android is.
• I'm tired of the old version of Android and want to expand its functionality.
• The phone doesn't want to turn on.
• The phone battery has stopped charging.

Download firmware for Lenovo Vibe P1m

When adding your review, please provide a valid Email address - instructions and a video review in Russian will be sent to it. Also in the attached file to the letter you will receive a download link via torrent, from which you can download the program for Lenovo Vibe P1m firmware with instructions in Russian.

Installation instructions

1. Download the application file (by clicking on the red “Download” link)
2. Install the application on your device
3. Launch the application
4. Select the desired version
5. In the application, enter your Email address to which the firmware with the program will be sent
6. Download the archive attached to the letter
7. Follow the instructions from the archive

Video instructions for flashing firmware for the Lenovo Vibe P1m smartphone and video review of the phone

Share the page with your friends:

Comments

Add a comment

Search

Interesting articles

TVs are gradually losing their popularity, but many people use similar ones.

Instagram is a rapidly growing social network that offers users...

YouTube's video hosting policy does not allow downloading of videos, even for users.

The shopping cart is an integral part of any smart device. Every user is interested.

Instructions for flashing the Lenovo Vibe P1 smartphone, updating the operating system, repairing problems associated with firmware errors, obtaining root super user rights. And also once you lock the bootloader and install custom TWRP recovery and custom firmware.

Instructions for installing QSB firmware from the internal memory of the Lenovo Vibe P1 phone

Before any actions with the firmware, the phone needs to be charged so that it does not turn off at the most inopportune moment. We remove the SIM card and memory card from the phone. In the internal memory of the phone, create a folder named “ sdfuse”

Download the firmware with “.qsb” resolution and move the firmware file to the sdfuse folder on your Lenovo Vibe P1 smartphone. (there should be only one firmware file in this folder) You can download the “.qsb” firmware for your Lenovo Vibe P1 phone – Android 6.0.1_160721

How to flash Lenovo Vibe P1

Installation and updating can be done with your own hands using programs for firmware, free of charge, the links contain both original, that is, stock, official (not modified), and custom firmware, that is, alternative, all with instructions.

1. First you need to download the firmware by selecting one of the options below. Along with it in the archive is the necessary set of programs (TWRP and others).
2. Then extract the file “instructions_rootgadget.txt” from the archive. Using the archiver program...
3. The firmware file contained in the zip archive must be downloaded to a memory card or smartphone memory.
4. For other information and sequence of actions, see the text instructions.

Lenovo Vibe P1 firmware

Choose what you like, we would recommend upgrading to the latest versions of Android.

• Android Pie 9.0 is a flagship OS, one might say, but still a little unfinished. URL: yourtopfile.info/android9pie
• 8.0 Oreo is an excellent option, with a minimum of bugs and rich functionality, but version 9 is certainly better. URL: yourtopfile.info/android8oreo
• 7.0 Nougat is a stable version in all respects, it works even on low-power hardware. URL: yourtopfile.info/android7nougat
• 6.0 Marshmallow - versions 5 and 6 are already really old, although they were once the pinnacle of progress. But if you switch to them from versions 3 or 4, then of course the difference is very noticeable. URL: yourtopfile.info/android6
• Android 10 URL: yourtopfile.info/android10
• Android 11 URL: yourtopfile.info/android11

Preparatory stage

Despite the fact that each subsequent firmware version brings a lot of new functions, after the update some smartphones are unstable. This happens when the user ignores the preparation step.

Before installing updates on Lenovo Vibe P1m, you need to meet 2 basic requirements:

• charge your smartphone at least 30%;
• perform a factory reset.

And if everything is clear with the first point, then the second raises many questions for some people. Resetting to factory settings completely deletes files from the smartphone's memory. This allows you to avoid errors when installing updates.

Of course, no one wants to lose personal data, so before resetting you need to create a backup:

1. Open settings.
2. Go to the "Storage and Backups" section.
3. Click on the Google Drive heading.

4. Activate the backup.

Performing these steps will result in the backup file being uploaded to cloud storage. After updating Android, it can be restored.

If there is not enough space on Google Drive to save all the data, it is recommended to create a backup copy through the “Backup and Restore” item. The resulting file should be moved to another device (for example, a computer) during the flashing process, and after the process is completed, return it back to the phone’s memory.

If the backup has been successfully created, you can safely proceed to restoring the phone to factory settings:

1. Launch device settings.
2. Go to the "Backup and Reset" section.
3. Select “Reset settings”.

4. Click the Reset Phone button.
5. Confirm the operation.

Now you need to reboot your smartphone, and then proceed directly to the process of installing new firmware.