How to flash Lenovo A516

This article is for those who decided to update the firmware and get root rights to the Lenovo A516 .

When should I update the firmware?

Reason number 1 - I wanted to install new firmware, expand the functionality and capabilities of the smartphone;
Reason two - there is a need to restore the device after unsuccessful firmware
The third reason is the incorrect behavior of the smartphone, constant reboots for no reason, glitches;
The fourth reason is that the smartphone does not turn on and shows no signs of life.

The installation is carried out in the same way as described in a separate topic with Lenovo a328. Follow the described algorithm of actions. Install recovery only for the a536 model. Download link TWRP, Philz Touch.

Installation is carried out by analogy with Lenovo a319. Follow the instructions from the instructions. After clearing the cache, reboot into TWRP again, and then install the firmware. Be sure to create a backup copy of the system so that you can restore it later.

How to flash Lenovo using FlashTool - preparatory stage.

Before you start flashing your Lenovo tablet, you need to prepare the necessary equipment and perform a number of simple steps.
So, first of all, you should download the Lenovo tablet firmware and drivers to connect the device to your computer. Be sure to fully charge the device's battery. According to the manufacturer's recommendations, the battery charge should be at least 50%. Next, you need to prepare a high-quality USB-MicroUSB cable, preferably short in length.

The process of updating software or firmware for Chinese tablets , as well as original Lenovo devices, is carried out using a computer or laptop. It must be remembered that if the computer is unstable or there are power surges, the firmware process may be interrupted. Which in turn will lead to the fact that the device may stop turning on.

For this reason, it is highly recommended to ensure stable power supply to your computer. It is advisable to carry out the firmware process on a stable laptop. Almost any version of Windows XP/7/8 x64 or x86 is suitable to run the program.

Lenovo firmware

Official and custom Lenovo firmware with a detailed description of the process and all the necessary programs and drivers. Firmware, download firmware, firmware 2, lenovo firmware, official firmware, phone firmware, firmware site, firmware official website, lenovo firmware, firmware update

Official firmware Lenovo Tab3 A8

Official firmware of Lenovo Tab3 A8 - TB3-850F_S100030_161209_ROW Creator: Lenovo Build date: 12/09/16 Firmware type: PC firmware File size: 1.14 GB Archive password: usehelp.org OS: 6.0 Description: Android 6.0 AOSP Children's ...

Lenovo zuk z2 firmware

Official Lenovo zuk z2 firmware Important information: When installing QSB firmware on a multilingual custom through stock recovery, the result is a BRICK! If you want OTA updates, flash the original ZUI via QFIL. Drivers and utilities for...

Official firmware Lenovo K900

Official Lenovo K900 firmware with detailed instructions. If you are interested in what's inside and how to disassemble the Lenovo K900, then go HERE Technical specifications: Processor: Intel Atom Z2580 (Dual Core, Hyper-Threading) - ...

Official firmware Lenovo Vibe S1 (firmware S1a40)

Official firmware for Lenovo Vibe S1 (model: S1a40) with detailed instructions. If you are interested in what's inside and how to disassemble the Lenovo Vibe S1, then let's get started HERE... Drivers: Download SP_Drivers_v1.5 Download Lenovo_ADB_driver...

Official firmware Lenovo Vibe K4 Note

Detailed instructions for flashing Lenovo Vibe K4 Note firmware. After reading this material, you can easily update your Lenovo smartphone. If you are interested in the topic of how to disassemble Lenovo Vibe K4 Note, then...

Lenovo Vibe Shot firmware

Detailed instructions: Lenovo Vibe Shot firmware Attention!! Before doing anything with the device, I strongly recommend that you make a backup of EFS/NV and the entire system of your smartphone in order to restore it at any time...

Lenovo S8 firmware

Lenovo S8 firmware - original and custom versions Drivers and utilities: Official drivers for working with the phone: All drivers are signed and installed effortlessly Version: 1.0.11 Operating systems: Windows XP SP2, ...

Firmware Lenovo Vibe Z (Lenovo K910)

Detailed instructions: Firmware for Lenovo Vibe Z (Lenovo K910). There are original and custom firmware as well as all the necessary programs. Important information! Before carrying out the described actions, the device must be flashed...

Where to download Lenovo firmware

The first step to install the operating system is to download the firmware that will be installed on your tablet or phone.

There are many sites for downloading firmware. I can recommend one of many - Proshivkis.ru.

It regularly updates versions, and most importantly, they post both official and custom firmware, which is also known as custom.

The portal to which I provided a link above publishes only verified operating systems, so there is no need to worry about the installation of malicious software.

Moreover, you first need to select the model of your smartphone or tablet computer on the website, and only then click on the required operating system. The link to the portal page with Lenovo brand models is here: https://proshivkis.ru.

Official firmware

Now I want to dwell briefly on the types of firmware. There is an official version that is approved by the manufacturers of a certain model of mobile device.

Such an operating system is optimized for a specific model and is guaranteed to work well on it.

I recommend installing the official firmware versions, because they will definitely function stably on your device.

Yes, in the case of outdated or problematic models, it will be possible to install only older versions of Android, but I believe that Android 7, which is guaranteed to work stably, is better than Android 10, which may simply not be suitable and slow down the functioning of the entire mobile device. and generally make it slower.

The fact is that any version of the operating system has system requirements. For the device to function normally, it must meet these requirements. But that's not all.

Root rights

If you want to get root access, you can use the universal program Rookthp Pro 3.2 , download here . Instructions for using the program can be found here. We can also recommend ZYKUroot version 2.2 among the universal ones. You can find out information about it at zykuroot.info We won’t talk about more popular programs, the same Kingo and Framaroot are always popular, although they are losing ground a little

Article updated on February 23, 2022:

This update concerns universal options for unlocking the bootloader, flashing firmware and speeding up Android smartphones. You need to know that unlocking the bootloader is only possible through a computer and is not possible through .apk applications , no matter what some authors on the sites invent.

FAQ in simple words:

What is a bootloader? The bootloader is responsible for starting and loading the operating system, as well as the Recovery Menu. That is, it is a very important element.

Why unlock the bootloader?

Installing custom Recovery
Patches and operating system updates.
System backup and other features

Will the warranty be void if the bootloader is unlocked?

No, if the phone is in working condition.

Will OTA updates work after unlocking?

Yes, they will.

What to do if the “cannot request parameter” error appears?

Try using the old USB 2.0 instead of USB 3, this usually solves the problem, the reason is unknown.

Instructions for flashing firmware and unofficial bootloader unlocking. All this can be accomplished in a couple of clicks; for this purpose, enthusiasts have created the appropriate software that is installed on the computer.
Speed up and clean your smartphone without root.

Recovering deleted contacts, photos and other data

If some files were deleted by mistake, they can be recovered in several ways.

From backup

If backup is enabled on your phone, you can restore files in this way:

Enter the smartphone settings;
Go to the “Restore and reset” section;
Click on “Recovery from internal card”;
Wait until the system performs the operation.

The names of menu items may differ on different device models and versions of Android.

From the phone's internal memory

If the owner did not perform a backup, the files can still be returned. They are stored in the device memory on free sectors until this space is occupied by new files. There are programs and applications for recovery from device memory.

Why update the firmware on your Android smartphone?

Everyone is motivated by different reasons.

The problem is with the quality of the pictures, even if you have a good camera.
Poor display response to touch.
I would like to understand what the new Android is.
I'm tired of the old version of Android and want new features and capabilities.
The smartphone does not turn on or is terribly glitchy.
The phone stopped charging.

How to flash Lenovo A516

First you need to download the firmware by selecting one of the options below. Along with it in the archive is the necessary set of programs (TWRP and others).
Next, unpack the archive and find the file “instructions_rootgadget.txt“. The archive can be unpacked using any archiver (7ZIP, WinRar and others).
The firmware file contained in the zip archive must be downloaded to a memory card or smartphone memory.
For other information and sequence of actions, see the text instructions.

Flash Lenovo A516 brick

Lenovo A516 -
Lenovo ideaphone A516 firmware Description | Discussion » | Modification of software and decorations » | Firmware
»

Download: Direct link (thanks to javum for compiling the original Recovery) Size: 5.96 MB (6,254,759 bytes) MD5: F73024014FF6169DE88FC4227CC77632 Basis: S117 firmware (kernel) Recovery installation:

Download and install the USB Driver.
You may need to disable driver signature verification (especially if you have Windows 8). Detailed instructions for installing the driver can be found here (see Stage 2); Download the SP Flash Tool and unpack it to the root of drive C. Download the archive from Recovery and unpack it into any folder without Chinese, Russian and other non-Latin characters in the path. Launch SP Flash Tool. Then we carry out all the actions in it. Click File > Open Scatter-loading file. and select the file MT6572_Android_scatter.txt from the recovery folder (step 3) Check the DA DL All With Check Sum box Press the Download button and answer Yes to the question Connect a completely switched off phone to the PC (without the “Fast boot” checkbox when turned off) ; If everything is correct, the red status bar will run first, then purple, yellow, and a green circle will appear, indicating the success of the operation. We disconnect the phone from the PC, remove the battery, insert it back and use it. Logging into Recovery: Turn off the device completely (without the fast boot checkbox checked). Turn on the device. As soon as the phone vibrates, hold down both volume buttons. Attention!
On official firmware, the factory recovery is observed to return the first time the phone is booted. To eliminate this annoying misunderstanding, you need to delete (with root rights) the /system/recovery-from-boot.p file. Or just flash TWRP and immediately log into it after flashing it. TWRP will block factory recovery. Using TWRP you lose the ability to update the OS over the air. Using the resulting ROOT (even if the factory recovery is returned), any changes to the official OS (removing “unnecessary” system applications, etc.) will also make it impossible to update the OS “over the air”

Lenovo s6000 firmware: execution process

Firmware

Why is firmware needed?
Firmware instructions
Conclusion

Why is firmware needed?

Firmware may be needed in the following cases:

the device refuses to turn on (the firmware will help if the failure is software and not hardware);
The tablet constantly reboots for unknown reasons;
system recovery is required after a previous unsuccessful firmware update;
you need to install the latest update (developers are constantly improving firmware versions, so by installing the latest version, the user receives additional features).

Firmware instructions

To install the firmware you will need the tablet itself, a computer and a USB cable. It is recommended to follow the instructions exactly so that the device does not end up as a “brick”.

Firmware

Depending on the state of the device, as well as the goals set by the user performing the firmware, the method of carrying out the procedure is selected. The methods described below are arranged in order from simple to more complex.

Method 1: MicroSD + Factory Recovery Environment

The first method by which you can try to install Android on HTC Desire 516 is to use the capabilities of the “native” recovery environment provided by the manufacturer. This method is considered official, which means it is relatively safe and easy to implement. You can download the software package for installation according to the instructions below using the link:

As a result of completing the steps below, we get a smartphone with the official firmware installed, intended for the European region version.

There is no Russian language in the package! The Russification of the interface will be discussed in the additional step of the instructions below.

Additionally: Russification

To Russify the European version of the OS, you can use the Android application Morelocale 2. The program is available on Google Play.

Method 2: ADB Run

The result of following the instructions below will be a smartphone with the official firmware version 1.10.708.001

(the latest available for the model) containing the Russian language. You can download the archive with the firmware from the link:

Download and unpack the archive with the firmware.
The folder obtained as a result of unpacking contains a multi-volume archive containing the most important image for installation - “System”
. It also needs to be extracted into the directory with the rest of the image files.
Install ADB Run.
Open the directory with ADB Run in Explorer, which is located along the path C:/adb, and then go to the “img”
.
Copy the files boot.img
,
system.img
,
recovery.img
, obtained as a result of unpacking the firmware, into folders with the appropriate names contained in the C:/adb/img/ directory (that is, the
boot.img
is in the C:\adb folder \img\boot and so on).
Writing the three above file images to the corresponding sections of the HTC Desire 516 flash memory can be considered a full installation of the system. In normal cases, it is not necessary to install the remaining image files, but if there is such a need, copy them to the C:\adb\img\all folder.
Enable USB debugging and connect the device to the PC.
We launch Adb Run and use it to reboot the device into mode "Fastboot"
. To do this, first select point 4
"Reboot Devices"
in the main menu of the application,
and then enter the number 3 from the keyboard - the item “Reboot Bootloader”
.
Press "Enter"
.
The smartphone will reboot into the “Download”
, as evidenced by the
“HTC”
on a white background.

In ADB Run, press any key, and then return to the main menu of the program - item "10 – Back to Menu"
.
Select “5-Fastboot”
.
The next window is a menu for selecting a memory partition into which the image file will be transferred from the corresponding folder in the C:\adb\img directory.
Optional but recommended procedure. We clean the partitions that we are going to write, as well as the partition "Data"
. Choose
"e - Clear Partitions (erase)"
.
And then, one by one, we go to the points corresponding to the names of the sections:
"Modem"
and
“Splash1”
DO NOT need to be erased!
We return to the image selection menu and write down the sections.

We transfer the image files in a manner similar to the previous step of the instructions "Recovery"
And "System"
to HTC Desire 516 memory.
"System" image
in essence, it is the Android OS, which is installed in the device in question. This section is the largest in volume and therefore its rewriting takes quite a long time. The process cannot be interrupted!
If there is a need to flash the remaining partitions and the corresponding image files are copied to the C:\adb\img\all directory, to install them you need to select the item "1 - Firmware All Partitions"
in the selection menu
"Fastboot menu"
.
And wait for the process to complete.
After finishing recording the last image, select in the request screen "Reboot device normal Mode (N)"
by entering from the keyboard
"N"
and pressing
"Enter"
.
This will lead to the smartphone rebooting, a long startup time, and eventually the HTC Desire 516 initial setup screen will appear.

Method 3: Fastboot

If the method of flashing each partition of the HTC Desire 516 memory separately seems too complicated or time-consuming, you can use one of the Fastboot commands, which allows you to write the main part of the system without, in some cases, unnecessary actions on the part of the user.

We check that the smartphone and PC are paired correctly. In the command line we send the command: fastboot devices
The system response should be the serial number 0123456789ABCDEF and the inscription "fastboot"
.
To avoid errors when performing the following steps, we indicate to Fastboot the location of the images by entering the command: set ANDROID_PRODUCT_OUT=c:\directory_name_with_fastboot
To start flashing, enter the command: fastboot flashall. Press “Enter”
and watch the execution process.
“Boot”
,
“Recovery”
and
“System”
sections will be overwritten , and the device will reboot into Android automatically.
If there is a need to overwrite other sections of the HTC Desire 516 memory in this way, place the necessary image files in the fastboot folder, and then use commands with the following syntax:
fastboot flash partition name image file name.img
For example, let’s write the “modem”
. By the way, for the device in question, writing the “modem” section is a procedure that may be necessary after restoring the smartphone from a non-working state, if as a result the smartphone works as it should, but there is no connection.
Copy the required image(s) to the directory with Fastboot (1) and send the command(s) (2): fastboot flash modem modem.img
Upon completion of work, restart HTC Desire 516 from the command line: fastboot reboot

Method 4: Custom firmware

The HTC Desire 516 model has not gained wide popularity due to its hardware and software features, so, unfortunately, it is impossible to say that there are many modified firmware for the device.

One of the ways to transform and refresh the device in question in software terms is to install an Android shell modified by one of the users of the device, called Lolifox. You can download all the necessary files that you will need when performing the steps in the instructions below using the links below.

In the proposed solution, its author has done serious work in terms of changing the OS interface (looks like Android 5.0), deodexed the firmware, removed unnecessary applications from HTC and Google, and also added an item to the settings that allows you to control startup applications. In general, the custom works quickly and stably.

Installing custom recovery.

To install a modified OS, you will need custom recovery capabilities. We will use it, although there is also a port for the device that you can download. In general, installation in D516 and work with different custom recoveries are similar.

Installing custom Lolifox

Once the modified recovery is installed in the HTC Desire 516, installing custom software is not difficult. It is enough to follow the instructions from the lesson at the link below, which involve installing zip packages.

Let us dwell only on a few points recommended for implementation for the model under consideration.