Most owners of modern gadgets have more than once encountered situations where the device malfunctioned or did not respond to commands. Unfortunately, almost all smartphones fail from time to time, regardless of manufacturer and price.
Today we will look at the problem when a Lenovo phone does not turn on, and we will look at the reasons for this.
Lenovo cell phones often suffer from problems with software and hardware components, especially if we are talking about budget models. One of the most common is spontaneous shutdown and lack of subsequent response to various user actions. Although the situation seems scary at first glance, only in extreme cases will you need service repairs or replacement of your smartphone. There are three types of sources of these breakdowns:
- Hardware - a problem in the hardware after falls, temperature fluctuations, tests by the sun, moisture and sand.
- Software – directly concerns the operating system, viruses and crashes.
- External – most often, a breakdown of the charger is mistaken for a problem in the smartphone itself.
Let's take a closer look at the reasons why your Lenovo phone won't turn on and how to solve them.
Trouble-shooting
In this section, we will look at the most common faults that cause Lenovo to not turn on:
- Complete battery discharge and other related battery problems.
- Firmware update failures.
- Software problems.
- Virus attack.
- Mechanical damage to internal parts.
Battery completely discharged
Battery problems can be temporary or permanent, and they have different solutions:
Incorrect system update
From time to time, the Android OS firmware and its shell are updated, but glitches may occur during the process. Often, after installing a new version of the system, equipment turns into a non-working “brick”. However, do not rush to replace it with another model; this can be solved by rolling back to factory settings.
It is done using Recovery Mode. Three buttons are pressed simultaneously in the following sequence:
- Volume rocker.
- Without releasing the previous one, return to the Desktop key.
- In parallel with them there is a power on and off button.
A menu will appear on the screen. The pointer moves with the volume rocker up and down respectively. You must select Factory Reset, confirm your choice and wait for the process to complete.
If after this the smart device does not work, then you need to contact a specialist, and he will do the flashing of the system himself.
Software glitches
Even more often, Android-based cell phones do not start due to various kinds of software glitches. The manufacturer and system developers have provided for such scenarios, so they advise resetting the settings in such cases. We have already discussed how to do it above.
Please note that pressing the keys in succession will not work to start recovery mode on some models. It is started by a special button on the end of the case, which looks like a small hole, using a needle or a special pin that comes with the kit.
Viruses
Viruses are another popular reason for difficulties with Android technology. They arrive by downloading files and applications from unknown sources, and can seriously damage system data necessary for startup. Most likely, a flashing will be required, which will completely delete the information. But in some cases, service center specialists still undertake manual cleaning of the system storage from viruses and malware.
You can avoid this outcome by first downloading anti-virus software, for example, Dr.Web or ESET.
Mechanical damage and moisture ingress
Let's look at the most popular types of mechanical damage that prevent switching on:
- Screen failure (malfunction of the cable, display, or moisture ingress through the seams).
- The charging socket is dirty. Dust, fabric threads from clothes or crumbs get into it. you need to be careful, using a regular needle.
- Damage to gadget contacts with batteries. This can be either oxidation or mechanical stress that led to deformation.
- Damaged power button. If the device is new, then most likely it is a factory defect.
- The worst option is a burnt-out power controller that controls charging.
The phone is stuck on the screensaver - what should I do?
The easiest way to solve the problem is to reboot the device multiple times. Sometimes it helps to restore the functionality of the device. It is necessary to hold down the power button until the device restarts 5-6 times. If everything goes well, your Lenovo phone will turn on and you will be able to access your files.
Simultaneous key press
Sometimes holding down the power button, volume key and home button helps.
Reset
If the method above did not help and the phone still froze when turned on, then you need to reset it to factory settings.
Important! During the Hard Reset process, all important data will be deleted, so it is recommended to backup your files.
A hard reset is performed using a special Recovery menu. The algorithm of actions is described in this material.
Flashing
If Lenovo A319 does not turn on and even after resetting the settings it is stuck on the logo, then you need to reflash it. You can flash the device from your computer or simply upload the zip archive to your phone, go to the Recovery menu and select the appropriate item -> more details here.
If you have found another way to deal with the “Lenovo A319 stuck on the logo” problem, write in the comments.
Related Posts
52 comments
Question about the problem of turning on Lenovo A319. In general, the same problem as was voiced by many - after the battery was completely discharged and the phone was unable to charge in the next two hours, after charging the gadget simply froze. When charging, the battery charge indicator did not respond as usual, but the reason was explained that the battery was completely discharged. When the phone was turned on, the suspicions that the phone had failed were completely confirmed. Moreover, the phone served faithfully, as a result of which the shortcomings of the system - such as the inability to update applications installed on the phone due to lack of memory, although there was a 4 GB flash card, and more than 2 GB remained free - were considered not significant by me, because I was satisfied with the functionality of the phone.
virtual expert
If you still have questions, ask them to a virtual expert, the bot will help you find the problem and tell you what to do. Talk to him about life or just chat, it will be interesting and informative!
Lenovo a319, s60, s960, s860 and others sometimes freeze on the splash screen, when turned on on the logo and while launching applications.
There are several reasons, but most often the fault lies in the software (firmware), memory and applications installed on the phone.
If there is not enough computing power, then a “trap is provided” - lenovo hangs or reboots
The manufacturer says that stable operation requires 700 MB of free space in the main (system) memory.
It is also necessary to monitor the number of installed applications, update them on a regular basis and, if possible, transfer them to an SD card.
NOTE: if such a fate befell you, then what to do and how to reboot your Lenovo phone if it is frozen and does not respond to anything
Option #3. Flashing
The third method is the most radical, but it is definitely worth using if the phone suddenly turns off, does not turn on, or freezes. We act according to simple logic - if the system cannot be restored, then it should be replaced. In the case of computers and laptops, we usually reinstall the operating system, and for phones, changing the firmware works.
First, download the firmware to your computer, and then transfer it to the memory card installed in the phone. The firmware is downloaded as an archive, and there is no need to extract files from it. We throw it on the map exactly in this form.
Now we go to Recovery in exactly the same way as in the previous case, that is, by holding down the power and volume buttons. If there are installation files on the memory card, the system will recognize them and offer you the following option: install zip from sdcard. This is exactly what we need if the phone turns off and we need to change the firmware. We confirm the actions by starting to download the file.
Typically flashing takes a few minutes. Don't be alarmed if your phone turns off during this process - this is quite normal. It can reboot, and repeatedly. And this is not a cause for concern.
After several reboots, the system will turn on, and, most likely, you will no longer see freezes and slowdowns. This means that the problem is a thing of the past, and now you know how to turn on a phone that has started to slow down or does not turn on.
Lenovo stuck - turn it off and on
Turning off the phone for a few seconds will refresh and clear the RAM and restore the device to standard operation.
Some applications and processes may freeze if there is not enough memory: RAM and phone.
Check by going to Settings > Storage and remove or move to a memory card if your phone supports it.
Make sure all apps are up to date - many developers provide updates to improve performance.
Open Play Store. Click on the icon, then click on “My apps and games.” You will see a list of available updates for installed applications.
Click update all. To update apps individually, tap the app and then tap Update.
If your Lenovo phone freezes frequently, then it may have an application installed that is not working properly and is consuming too much of the device's resources.
If you're having problems after installing or using a specific app, try uninstalling it to see if that solves the problem.
The phone keeps freezing - update the android software
If the problem is not caused by the application, look for a software update, it may appear.
To do this, go to “Settings”. Click About Device > and go to Software Update. Select check now and install if available.
The developers know very well how their firmware works, and if they receive a lot of notifications about freezes and crashes, they release fixes.
However, the opposite happens: the new version starts to freeze, then you should return to the old one. This can be done through a reset.
Do you just see the logo?
If your phone still turns on but can't boot past the manufacturer's logo, it's a software problem called a bootloop. This problem may occur to you if you have recently updated or flashed your device. In this case, a factory reset, clearing the cache, or changing the software will probably help you. You can entrust this matter to specialists or check on the Internet how to reset settings on your smartphone model.
Based on materials from AndroidPit
It happens that the user turns on his smartphone, the process reaches the splash screen (logo) and then does not load further. Panic immediately begins, because the phone turns on, but does not boot. Perhaps the reason for this was a firmware failure or mechanical damage. In any case, something needs to be done, let's figure out what.
Restoring factory settings if your Lenovo phone freezes
As a last resort you can. Before you do this, please note the following points:
Resetting will delete all phone data and media files. They will be lost and will not be restored unless previously synced or backed up.
Therefore, you should back up all important data and files. Also make sure that the battery level is at least 35%, or the phone is connected to a charger.
Make sure you don't forget your Google username and password. They will be needed to unlock your phone after a factory reset.
Phones running Android 5 or higher may have security enabled, which means that after the reset, you'll need to sign in with the same Google account you previously used.
If the reason is the battery and charging
You can check this very simply. It is enough to find a similar battery and a similar charger somewhere. If, after replacing all the components, you do not see any changes, then the reason that the HTC phone does not turn on beyond the splash screen is much deeper than you thought. There are only two options: damage to the charging socket or the board itself.
Dealing with a faulty battery or a “glitched” charger is easy. These are not particularly expensive smartphone components. They can simply be replaced with new ones. The problem with the hardware board will be much more noticeable. Here (in most cases) you can’t do without a visit to the workshop. Sometimes you have to pay a very significant amount for repairs.
Lenovo phone freezes when turned on and does not turn on
This can happen if you install software from unverified sources. A return (reset) will return the phone to its “original” state (as after purchase).
Also, the problem can be solved (not always, of course, depends on the specific one) by changing the firmware. This can be done independently or at a service center.
Just keep in mind that erroneous actions or inappropriate firmware can completely ruin your Lenovo.
CONCLUSION: Of course, it is impossible to take into account all the points. I described only the basic ones. If they didn’t help you, use a friend in the form of a comment function. Good luck.
What to do if your Lenovo phone does not turn on?
If you encounter a problem that your Lenovo phone does not turn on, you need to do a little diagnostics yourself. And, perhaps, you can fix the problem yourself at home, without going to a service workshop. Of course, this depends on the complexity of the damage and therefore we suggest familiarizing yourself with the most obvious reasons.
Video
The Lenovo A319 phone is one of the best options for lovers of budget gadgets. The manufacturer has a good reputation, and the smartphone itself is quite inexpensive. However, no matter how reliable the device is, one day you may encounter technical problems.
Many people are concerned about the question: what to do if the A319 does not turn on? And what if Lenovo a319 does not turn on and is stuck on the splash screen? Many users of this gadget have encountered this problem. Since it is very common, we suggest that you familiarize yourself with the main options for solving it.
Firmware, update
Often, due to incorrect operation of the Android operating system, malfunctions occur and you are faced with the fact that your Lenovo phone does not turn on. Reasons that contribute to this:
- the system does not have anti-virus protection;
- using a large number of applications from unknown developers;
- Software garbage is not cleaned;
- The phone's memory is maximally full.
Problems related to software errors can be solved in three ways:
- reset settings to factory settings;
- update or flashing.
Reflashing should be a last resort, but it eliminates most of the defects caused by platform functionality failures.
Option #1. Reboot
We are all accustomed to the fact that if some equipment does not work, then it needs to be rebooted. And it is not at all necessary to find out why exactly it does not start or starts to turn on, but does not load completely. There are a huge number of reasons for failures, and even experts cannot always name the problem you encountered in a particular case.
So if Lenovo A319 does not boot or freezes when turned on, the best and easiest way to resolve the issue is to reboot the phone.
Have you tried rebooting your device but that didn't help? Then repeat it five more times. Getting the system to boot normally is not so easy, but repeated reboots are successful in the vast majority of cases.
You can also try holding down the Home button, as well as the Power and Volume keys at the same time. Some Lenovo models, including the A 319, respond to such an impact and stop hanging.
The main advantage of these methods of solving the problem is the absence of any risk to the phone and the data stored on it. This is their main difference from the methods of bringing the phone back to life, which we will consider further.
Mechanical damage and moisture ingress
Any careless action with the gadget will lead to negative consequences. Mechanical damage such as a fall or blow can cause damage that can be corrected by expensive repairs. The same applies to liquids getting on the phone. It is necessary to immediately take action to prevent further oxidation of elements inside the smartphone.
Lenovo A319 is a popular smartphone that has been discontinued for a long time, but is still widely used among people. If you are one of the owners of this smartphone, then you definitely need to know how to do a Lenovo A319 hard reset.
Hard reset is literally translated into Russian as “hard reset”, but a more literary name is reset.
The instructions for Lenovo A319 hard reset help in almost all cases of smartphone malfunction. This could be a locked smartphone through a forgotten pattern key. You can also use reset Lenovo A319 if the smartphone freezes or does not turn on at all.
In short, Lenovo A319 hard reset can be used in any unclear situation, but you must be prepared for the fact that all data on the smartphone will be deleted
. You need to back up your data so you don't lose your photos, contacts, messages, apps, and the rest.
Also make sure your smartphone battery is at least 70% charged. The Lenovo A319 hard reset process itself only takes a couple of minutes, but you cannot allow the smartphone to turn off while cleaning the internal memory.
Option #2. Hard Reset
If a simple reboot does not help, and Lenovo a319 still does not turn on or does not load beyond the splash screen, you need to resort to more radical measures. The best option is to reset all settings, or, in other words, Hard Reset the phone. This is quite simple to do - you just need to go into Recovery mode.
To make it easier for you to complete this procedure, we offer a simple algorithm:
- Turn off the phone by holding down the power key for 10-15 seconds.
- Press the Power and Volume Down keys at the same time. You can do this with one hand, but we recommend using both. There have been cases when, through negligence, people dropped the device while trying to press both buttons with the fingers of one hand.
- We wait for the manufacturer’s logo to appear, and after a few seconds we find ourselves in Recovery mode.
- Using the volume down and up buttons, select the “Wipe Data” item. It involves deleting all data and settings from the phone. This way, whatever the software problem is, you will most likely fix it.
- The system will ask if you really agree to delete all data. Confirm your actions and wait about a minute. Next, agree to reboot the device and wait for the updated software to download.
If all systems start normally and the phone functions the same as it did before the problems arose, then congratulations - you have found a relatively simple and painless way to resolve the issue. If the phone still does not turn on, or the download does not go beyond the screen saver, you can only resort to the third method.
